ZMS Cable logo Get a Quote
Applications
Applications

Control cable for the real installation

The datasheet tells you the cable is 300/500 V. The application tells you whether it needs a screen, armour, a blue sheath or a low-smoke jacket. These are the six application families we support most often.

Home / Applications
Application map

Signal, interference, route, environment

Four questions determine most control cable specifications. We use them to move from a generic product family to the construction that belongs in the project.

PLC, DCS & control panels

Panel-to-field wiring for digital and analogue I/O, relays, contactors and interlocking. General and shielded control cables are the core of this application.

Recommended range →

Petrochemical & hazardous areas

Field instruments in IS circuits use blue-sheathed, foil-screened cable. Armoured and LSZH options are available for the route and the environment.

Recommended range →

Substation & relay protection

Control, indication and measurement circuits need predictable screening and mechanical protection in electrically noisy outdoor yards.

Recommended range →

Industrial robotics & motion

Drag chain, robot cell and servo feedback circuits require high-flex conductors and, where drives are present, an overall screen.

Recommended range →

Metro, tunnel & public infrastructure

Confined spaces and evacuation routes favour LSZH constructions with low smoke and halogen-free performance, with armour where mechanical risk is high.

Recommended range →

Building automation & HVAC

Pump, fan, BMS and HVAC control wiring uses general multi-core control cable with clear core identification and reliable termination.

Recommended range →
Selection matrix

From application to construction

PLC, DCS & control panelsPanel-to-field wiring for digital and analogue I/O, relays, contactors and interlocking. General and shielded control cables are the core of this application.
Petrochemical & hazardous areasField instruments in IS circuits use blue-sheathed, foil-screened cable. Armoured and LSZH options are available for the route and the environment.
Substation & relay protectionControl, indication and measurement circuits need predictable screening and mechanical protection in electrically noisy outdoor yards.
Industrial robotics & motionDrag chain, robot cell and servo feedback circuits require high-flex conductors and, where drives are present, an overall screen.
Metro, tunnel & public infrastructureConfined spaces and evacuation routes favour LSZH constructions with low smoke and halogen-free performance, with armour where mechanical risk is high.
Building automation & HVACPump, fan, BMS and HVAC control wiring uses general multi-core control cable with clear core identification and reliable termination.

Not sure which family?

Send us the application description, the signal type, the route and any hazardous-area classification. We will map it to a construction and explain the trade-offs.

  • Signal level and frequency
  • Drive or switching equipment nearby
  • Direct burial, tray, duct or carrier
  • Fire, smoke and halogen requirements
  • Hazardous-area classification
Ask for a Recommendation
On site

Where the cable actually goes

Routes, plant and project conditions from our own deliveries — the same inputs that decide the construction quoted for your line.

Screening and sheathing
Screening and sheathingCollective and individual screens applied over the twisted pairs before the SHF1 or LSZH sheath.
Panel and field wiring
Panel and field wiringControl and instrumentation cable staged for panel-to-field wiring and the loop check.
Drum-marked cores
Drum-marked coresCores numbered and colour-coded to the loop schedule, delivered on marked drums.
Delivery to site
Delivery to siteCable packed for shipment to the plant or the substation, with the routine test report per drum.
Engineering support

Tell us where the cable has to work.

We will recommend the control cable family and construction, then quote the exact specification.