
Armoured Control Cables
Armoured control cables are specified where the cable route crosses yards, trenches, ducts or areas exposed to impact and rodent damage. Galvanised steel wire armour provides tensile strength and crush resistance; an optional overall screen protects the control signal.
Armoured Control cable products
Product pages include the full construction table, options and applications.

Armoured Shielded Control Cable
Steel wire armour plus an overall copper screen for buried and mechanically exposed control routes.
Technical details →Custom construction
Different cores, screen, armour or sheath? We build to the project specification.
Start a custom inquiry →More control cable options
Compare the other control cable families before you specify the screen, armour and sheath.
Browse all products →Armoured Control cable specification
| Rated voltage | 300/500 V |
|---|---|
| Conductor | Plain copper, Class 1/2 |
| Insulation | PVC / XLPE |
| Armour | Galvanised steel wire (SWA) or steel tape (STA) |
| Screen | Optional overall Cu braid |
| Core range | 2–37 cores |
| Sheath | PVC / LSZH |
| Standard | IEC 60227, IEC 60228 |
Typical construction data. Final values are confirmed on the order-specific datasheet.
Customisation
We can adapt this family to the project requirements. Common options include:
- Core counts outside the standard range
- LSZH, PE or PUR sheath
- Overall or individual screens
- SWA, STA or AWA armour
- Customer core identification
Where armoured control cable is specified
The right construction depends on signal level, interference and the mechanical route.
Industrial yards
Above-ground and buried routes between plant buildings.
Substation & utility
Control and indication circuits in outdoor switchyards.
Tunnels & ducts
Mechanically protected control routes in infrastructure.
Need help selecting armoured control cable?
Send the circuit details, route and environment. We will recommend the construction and prepare a quotation.
