
Shielded Control Cables
Shielded control cables add a metallic barrier around the core assembly to drain induced noise away from sensitive circuits. Choose copper braid for mechanical robustness and low transfer impedance, or aluminium/polyester foil with a drain wire for cost-effective static screening.
Shielded Control cable products
Product pages include the full construction table, options and applications.

Copper Braided Shielded Control Cable
Overall copper braid screen for control and feedback circuits in electrically noisy plants.
Technical details →
LSZH Control Cable
Low-smoke halogen-free control cable for tunnels, public buildings and confined industrial spaces.
Technical details →Custom construction
Different cores, screen, armour or sheath? We build to the project specification.
Start a custom inquiry →Shielded Control cable specification
| Rated voltage | 300/500 V |
|---|---|
| Conductor | Plain or tinned copper, Class 1/2/5 |
| Insulation | PVC / PE / XLPE |
| Screen | Cu braid ≥85% coverage or Al/PET foil + drain |
| Core range | 2–37 cores |
| Cross-section | 0.5–6 mm² |
| Sheath | PVC / LSZH |
| Standard | IEC 60227, IEC 60228 |
Typical construction data. Final values are confirmed on the order-specific datasheet.
Customisation
We can adapt this family to the project requirements. Common options include:
- Core counts outside the standard range
- LSZH, PE or PUR sheath
- Overall or individual screens
- SWA, STA or AWA armour
- Customer core identification
Where shielded control cable is specified
The right construction depends on signal level, interference and the mechanical route.
VFD & servo systems
Screened control and feedback circuits near variable-speed drives.
Robotics
Signal wiring on moving machine axes and robot cells.
Substation control
Relay and measurement circuits in electrically noisy yards.
Need help selecting shielded control cable?
Send the circuit details, route and environment. We will recommend the construction and prepare a quotation.
